Skip to content
Cart

Composite vs Merbau vs Treated Pine Decking: Real Sydney Costs for 2026

Merbau hardwood deck off the alfresco of a Sydney home

Here is the part most quotes hide: the decking boards are usually the cheapest thing on your deck. Labour and the frame underneath do the damage.

Short answer: in Sydney in 2026 a deck costs roughly $205 to $400 per m² in treated pine, $345 to $630 in merbau and $320 to $630 in composite, supplied and installed. A typical 25 m² deck lands between $9,200 and $18,400. Pine is cheapest on day one, composite is cheapest to own, and merbau is the one people fall in love with.

Key takeaways

  • ✔ Merbau boards at our yard work out to about $53 per m². Installed merbau decks cost $345 or more per m². The boards are a small slice.
  • ✔ Composite boards cost about twice as much as merbau to buy, then almost nothing to keep.
  • ✔ Timber needs oiling. A paid sand and re-oil runs about $25 to $60 per m² each time.
  • ✔ Whatever goes on top, the frame decides how long the deck lasts.
  • ✔ Near bushland, the choice may be made for you. Merbau is one of seven timbers the bushfire standard lists as bushfire-resisting.

Composite, merbau and treated pine decking boards side by side

Side by side

Treated pine Merbau Composite
Built deck, Sydney, per m² $205 to $400 $345 to $630 $320 to $630
Boards only, per m² About $30 to $50 (market guide) About $53 (90x19 at $4.99 per metre) About $109 (Eden 140x22, $85 per 5.4 m board), plus clips
Boards for a 25 m² deck Ask us for today's price About 290 m, $1,447 36 boards, $3,060
Upkeep Stain or oil regularly Oil every year or two, or let it silver Wash it
Look Pale, takes any stain Deep red-brown, real grain Even colour, timber-look texture
Best for Tight budgets, rentals, decks you plan to paint The classic hardwood deck Low upkeep, pool surrounds, busy households

Installed ranges: What's The Damage, Sydney decking guide, updated July 2026, GST included. Board prices: Alpha Timber, November 2026, GST included, allowing a 5 mm gap and 10% waste on the 25 m² figures. Indicative only. Ask us for a written quote.

Where the money really goes

Take merbau. The boards for a square metre cost about $53. The finished deck costs $345 to $630 for that same square metre. Somewhere between 85 and 90 cents of every dollar goes on the frame, fixings, footings and the carpenter.

That changes how you should shop. Saving $10 a square metre by picking a cheaper board barely moves the total. Getting the design right moves it a lot: a low, simple rectangle with no steps or balustrade can cost half as much per square metre as a raised deck with stairs.

Treated pine: lowest price in, most work after

Pine is the budget choice and there is nothing wrong with that. It is easy to cut, easy to fix and takes stain well. It is also soft, so it marks, and it moves more as it dries. Expect to recoat it often if you want it to look good. Cost guides put a pine deck's life at about 15 to 25 years.

Merbau: the one everyone pictures

Merbau is dense, stable and naturally durable, which is why it has been Sydney's default hardwood deck for decades. Two things to know before you lay it. First, it bleeds tannin when it gets wet in its early life, and that can stain pavers and render, so wash it down or let it weather before it sits over anything pale. Second, the red-brown colour needs oil to stay. Leave it alone and it turns silver-grey, which some people prefer.

See our 90x19 merbau decking, sold by the lineal metre.

Composite: pay once, then hose it

Composite boards cost more to buy and are fixed with hidden clips, so there are no screw heads on the surface. There is no oiling, no splinters and the colour is even from board to board. Dark colours get hot in full summer sun, so choose a lighter board for a deck with no shade. Composite boards are commonly warrantied for 25 years or more. Read the warranty for the board you are buying.

See Eden composite decking in six colours, and the full composite decking range.

The frame matters more than the boards

A 30-year board on a 10-year frame is a 10-year deck. Use H3 treated pine for joists and bearers above ground and H4 for anything in the ground. Keep the frame ventilated, and follow the board maker's joist spacing. Composite usually needs joists closer together than hardwood does.

Three questions that pick the board for you

  1. Will you oil it? If the honest answer is no, choose composite or accept silver merbau.
  2. How long will you own the house? Under five years, pine or merbau. Longer, composite earns its price.
  3. Is the block bushfire-prone? Check your BAL first. Our guide to decking in bushfire zones explains what each level allows.

Frequently asked questions

How many boards do I need?

For 90 mm boards with a 5 mm gap, allow about 10.5 lineal metres per m². For 140 mm boards, about 6.9. Add 10% for cuts and waste.

Do I need council approval?

In NSW a small, low deck can often be built as exempt development if it meets the limits on size, height and distance from the boundary. Check the NSW Planning Portal or your council before you order.

Can I mix them?

Yes. A treated pine frame with merbau or composite on top is the standard build.

Get your deck priced properly

Send us the size and height of your deck and we will price the boards, frame, fixings and clips as one order. Request a quote or browse decking. We deliver across Sydney from Ingleburn.

Prices and ranges as at November 2026. Every site is different.

Sources: What's The Damage, decking cost Sydney (July 2026); What's The Damage, composite decking cost (November 2026); The Quote Yard, timber decking cost NSW 2026; Alpha Timber shelf prices, November 2026.