Description
HardieGroove Lining is James Hardie's 7.5 mm fibre cement lining sheet with vertical V-grooves, sold here as a 2700 x 1200 mm sheet (product code 400245). It lines interior walls and ceilings with the look of timber lining boards, and the half-groove long edges let sheets butt together with a concealed join.
Key facts
- Brand: James Hardie, product code 400245
- Size: 2700 x 1200 x 7.5 mm
- Material: fibre cement, V-grooved face
- Grooves: individual batten widths of 100 mm
- Edges: half groove on the long edges for a concealed butt joint
- Coverage: 3.24 m² per sheet
- Weight: James Hardie's guide gives about 10.4 kg per m², so about 34 kg per sheet
- Use: interior walls, full height or dado height, and ceilings. Not in showers, and not as external wall cladding
- Sold as: single sheets
What it is used for
Interior wall and ceiling lining where you want a traditional lining board look, including living areas, hallways, rumpus rooms, kitchens, laundries and bathrooms (not in the shower). James Hardie also lists it for eaves and soffits. It can be painted or stained.
Installation
These points come from James Hardie's Hardie Groove Lining installation guide (November 2024), which is in the Certificates & Brochures section on this page. Follow the guide for fastener spacing, stud spacing and corner details.
- Fix to timber or light gauge steel framing (0.55 to 1.6 mm BMT), on walls or ceilings. Minimum stud width is typically 35 mm, and 38 mm where sheets butt join.
- Sheet joints must land on the centre line of a framing member. Butt the two half-groove edges together on the stud.
- Timber frames: 30 x 2.8 mm galvanised fibre cement nails, or 25 x 2.5 mm ring shank underlay nails where a smaller head is wanted (low traffic areas only).
- Steel frames: 25 mm Hardie Drive screws.
- In N4/C2 wind areas or higher, James Hardie reduces fastener spacing to 150 mm and stud spacing to 450 mm centres.
- Ceilings: fix to timber battens or metal furring channels, not to the bottom chord of roof trusses.
- Fill over the fixings with a sandable finishing compound, sand lightly and finish with a suitable paint system. Test any stain on an offcut first.
- Fibre cement dust contains silica. Indoors, cut only with a score knife, hand guillotine or fibreshears. Never use a grinder, never dry sweep, and wear at least a P1 respirator for any dusty work.
For more details, call us on (02) 4605 0215 and we will help you.
Common questions
Can I use HardieGroove as external wall cladding?
No. James Hardie calls it an internal lining. Ask us about Hardie exterior cladding if you need a board for the outside walls of a building.
Can I use it in a bathroom?
Yes, outside the shower. James Hardie says it must not be used in shower areas.
How many sheets do I need?
Each sheet covers 3.24 m². Divide the wall or ceiling area by 3.24, round up and add about 10% for cuts. A 3.6 m wide wall 2.7 m high needs 3 sheets plus offcut allowance for openings.
Can I pick it up or get it delivered?
Yes. Pick up from our store at 10 Lancaster Street, Ingleburn, or have it delivered across Sydney with the rest of your order. At about 34 kg a sheet, two people should carry it. Call (02) 4605 0215 to check stock.
Specifications
- Brand
- James Hardie
- Product type
- Cladding
- Title options
- Default Title
- SKU
- 400245
- Prices
- Include GST
Ask a human expert
Not sure on size, length or quantity? Talk to our team — Mon–Fri 6am–4pm, Sat 6am–3pm.
Delivery & Click + Collect
Pick up from 10 Lancaster Street, Ingleburn, or have it delivered to site across Greater Sydney. Ask us for a delivery price to your site.
Delivery & collection detailsJames Hardie HardieGroove lining 7.5mm, 2700 x 1200mm fibre cement
2700 x 1200 x 7.5 mm James Hardie HardieGroove lining, a fibre cement sheet with V-grooves at 100 mm for interior walls and ceilings with a timber lining board look.
Need a whole-job price? Send us your plans.Request a quote
You May Also Like
All prices include GSTFull specifications
- Sheet size
- 2700 x 1200 mm
- Thickness
- 7.5 mm
- Material
- Fibre cement, V-grooved face
- Groove spacing
- 100 mm batten widths
- Edges
- Half groove on the long edges for a concealed butt joint
- Coverage
- 3.24 m² per sheet
- Weight
- About 10.4 kg per m² (James Hardie), about 34 kg per sheet
- Product code
- 400245
- Sold as
- Single sheet
- Typical use
- Interior walls and ceilings; not in showers; not external wall cladding
