Description
InstaPanel White 802 is a 383 mm wide, 16 mm thick insulated wall cladding panel from DEVOX, with a fine, sandy stone-texture face in a light warm white. It is a non-structural cladding for external walls, and it can also line internal walls and feature walls.
Key facts
- Brand: DEVOX InstaPanel
- Panel width: 383 mm
- Thickness: 16 mm
- Lengths: 2.7 m, 3.0 m and 5.8 m
- Colour: White 802, a light warm white with a stone texture
- Build: pre-finished Al-Zn alloy metal face, rigid polyurethane (PU) foam core, aluminium foil backing
- Edges: tongue and groove, interlocking along the long edges
- Weight: about 3.7 kg per m² (DEVOX's guide). That is about 3.8 kg for a 2.7 m panel, 4.3 kg for 3.0 m and 8.2 kg for 5.8 m
- Coverage: about 1.03 m², 1.15 m² and 2.22 m² per panel, worked from the 383 mm width
- Sold as: single panel
What it is used for
Exterior facades, upper-storey walls, feature walls, renovations and new builds. The panels interlock along their long edges for a continuous wall with neat joint lines. Also available in Grey 801.
DEVOX's guide sets these limits. The panels do not provide structural support or bracing. They are not the main waterproofing layer, so an external wall needs wall wrap and flashings behind them. They have not been tested for walls that need a fire resistance level (FRL). They must not be installed less than 900 mm from an allotment boundary or 1800 mm from another building, as defined in the NCC. DEVOX's guide describes the panel as fire resistant, fade resistant, crack resistant, noise reducing and able to withstand hail, but it gives no test reports for these.
Installation
Follow the InstaPanel installation guide (PDF). The main points from it:
- Fix to timber or light gauge steel framing with studs at 450 mm maximum, or to battens over masonry. The guide lists 40 x 25 mm MGP10 or H2/H3 treated pine battens. Direct fixing to brick veneer alone is not recommended.
- External walls need a continuous vapour permeable wall wrap and flashings.
- Panels can run vertically or horizontally. Start from the starter trim, screwed at 450 mm maximum.
- Screw each panel through the tongue edge, not the insulated core, at 450 mm maximum. The guide lists 10 gauge bugle head coarse thread Class 3 screws, and Class 4 or stainless steel in corrosive environments.
- Run sealant along the side of each panel before the next panel goes on.
- Cut with an angle grinder or circular saw set up for metal-faced panels, and seal or protect cut edges.
- The guide names starting, closing, centre joint and corner trims. Ask us which trims are in stock.
The guide states a 10 year warranty against defects in manufacture or materials, with conditions. Read it before you start.
Common questions
How many panels do I need?
For panels run vertically, divide the wall width in metres by 0.383 and round up. By area, a panel covers about 1.03 m² (2.7 m), 1.15 m² (3.0 m) or 2.22 m² (5.8 m). Allow extra for cuts around windows and doors.
How heavy is a panel?
About 3.7 kg per square metre, so about 3.8 kg for a 2.7 m panel and about 8.2 kg for a 5.8 m panel.
Can I use it on a wall that needs a fire rating?
DEVOX's guide says the panels have not been tested for walls that need a fire resistance level, and sets the boundary distances above. Check with your certifier before you order.
Can I pick it up or get it delivered?
Yes. Pick up from our yard at 10 Lancaster Street, Ingleburn, or have it delivered across Sydney. The 5.8 m panels need a long vehicle, so call (02) 4605 0215 for a delivery quote.
Specifications
- Brand
- ALPHA TIMBER
- Product type
- Cladding
- Profile options
- InstaPanel 383 x 2700mm White 802, InstaPanel 383 x 5800mm White 802, InstaPanel 383 x 3000mm White 802
- SKU
- CWC0005
- Prices
- Include GST
Ask a human expert
Not sure on size, length or quantity? Talk to our team — Mon–Fri 6am–4pm, Sat 6am–3pm.
Delivery & Click + Collect
Pick up from 10 Lancaster Street, Ingleburn, or have it delivered to site across Greater Sydney. Ask us for a delivery price to your site.
Delivery & collection detailsDEVOX InstaPanel insulated wall cladding panel 383 mm, White 802
383 mm wide, 16 mm thick DEVOX InstaPanel insulated wall cladding panel in White 802 stone texture. Metal face, PU foam core, interlocking edges. Lengths 2.7, 3.0 and 5.8 m.
Need a whole-job price? Send us your plans.Request a quote
You May Also Like
All prices include GSTFull specifications
- Panel width
- 383 mm
- Thickness
- 16 mm
- Lengths available
- 2.7 m, 3.0 m, 5.8 m
- Colour
- White 802 (light warm white, stone texture)
- Face
- Pre-finished Al-Zn alloy metal sheet
- Core
- Rigid polyurethane (PU) foam
- Backing
- Aluminium foil
- Edges
- Tongue and groove, interlocking
- Weight
- About 3.7 kg per m² (about 3.8, 4.3 and 8.2 kg per panel)
- Coverage
- About 1.03, 1.15 and 2.22 m² per panel
- Maximum stud spacing
- 450 mm
- Sold as
- Single panel
- Typical use
- Non-structural external wall cladding and internal feature walls